Aerohive Networks AP650 User Manual

AP650 and AP650X Hardware User Guide
The AP650 and AP650Xare high-performance dual-5G and dual band access points.
Both are designed for indoor high-density environments that require HD video streaming andlarge file transfers. The AP650X has external antennas
(soldseparately), and an extended temperature range for industrial environments. These devices support IEEE 802.11ax Orthogonal Frequency-Divi-
sion Multiple Access (OFDMA) multi-user access.
Both access point have a Bluetooth BLE i-beacon for location based services.
For regulatory and compliance information, see "Regulatory Compliance Statements".
Important! Change the Country Code
If your access point is configuredfor the World Regulatory Domain, it is important to set the country code to the country in which the APwill be
deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-
ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.
1. Power on the AP and allow it to find and connect to HiveManager. Once the APis connected it appears in the table of devices on the >
Devices page.
2.
Select the checkbox next to the AP, andthen choose Assign Country Code from the Actions drop-down list. In the dialog box that
appears, select the appropriate country from the drop-down list, and then click Save.
3. Upload your changes to the device.
Safety Guidelines
Safety Guidelines
The safety information in this section applies to AP650 and AP650X devices.
The following safety icons are used in these guidelines to identify the type of precaution:
AP650 and AP650X Hardware User Guide
Page 1

Aerohive Networks AP650 Specifications

General

Model	AP650
Wireless Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	1.3 Gbps
Mounting Options	Wall, Ceiling
Concurrent Clients	Up to 256
Radio Chains/Streams	2x2:2
MIMO	Yes
Ethernet Ports	2 x 10/100/1000BASE-T Ethernet ports
Power over Ethernet (PoE)	802.3af/at
Antenna Type	Internal
Operating Temperature	0 to 50 °C
Weight (kg)	0.68 kg

Summary

Important! Change the Country Code

Safety Guidelines

Install the AP

Shipping Carton Contents

Lists items included in the product packaging for initial setup.

Install the AP on a Ceiling Track

Mount the AP on a Wall

Lock the AP

Connect the AP to the Network

Hardware Components

Component Descriptions

Explains the meaning of status lights and ports on the device.

Hardware Specifications

Radio Specifications

2.4 G Sensitivity

5 G Sensitivity

Device Specifications

Power Specifications

Details the power input voltage range and pinout for PoE.

Power Consumption

Lists the power consumption for AP650 and AP650X models under different conditions.

Environmental Specifications

Outlines the operating temperature and humidity ranges for the devices.

Regulatory Compliance Statements

Japan Indoor Use

Specifies restrictions for indoor use in Japan regarding the 5150-5250 MHz band.

Japan Equipment VCCI-B Statement

Compliance Statement - Europe

USA and Canada Radio Frequency Bands

Canada Radio Frequency Bands

EU Radio Frequency and Power Levels

EU Radiation Warning Statement

Federal Communication Commission Interference Statement

Radiation Exposure Statement

States FCC compliance with radiation exposure limits and installation guidelines.

Brazil Statement

Mexico Statement

Industry Canada Statement

Dynamic Frequency Selection (DFS)

Explains the purpose of Dynamic Frequency Selection for certain bands.

Radiation Exposure Statement

States IC compliance with radiation exposure limits and installation guidelines.

Taiwan Compliance Information

Taiwan MPE Warning

Warning related to Maximum Permissible Exposure (MPE) in Taiwan.