Need help?Do you have a question about the Aeroneb Solo System and is the answer not in the manual?
General| Technology | Vibrating mesh |
|---|---|
| Medication Capacity | 6 ml |
| Residual Volume | < 0.1 ml |
| Operating Temperature | 10°C to 40°C |
| Power Supply | AC power or battery operated |
| Nebulization Rate | 0.2 ml/min |
| Operating Mode | Continuous |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 15% to 95% (non-condensing) |
Specifies the intended patient population and device application for the Aeroneb Professional Nebulizer System.
Details the controls and indicators on the Aeroneb Pro-X control module for North American models.
Details the controls and indicators on the Aeroneb Pro-X control module for international models.
Defines the validated usage life for the Aeroneb Solo nebulizer unit and associated components.
Instructions for assembling and installing the Aeroneb Solo system for intermittent nebulization.
Procedure for recharging the internal battery of the Aeroneb Pro-X control module.
Guides on connecting the nebulizer unit to various breathing circuits for ventilator use.
Instructions for connecting the Aeroneb Solo system for use with a patient mask.
Instructions for connecting the Aeroneb Solo system for use with a patient mouthpiece.
Details the procedure for adding medication to the Aeroneb Solo nebulizer unit.
Provides physical dimensions, weights, and capacity details for the Aeroneb Solo system components.
Outlines operating and storage conditions, including temperature, pressure, and humidity requirements.
Details flow rate, particle size distribution, aerosol output, and residual volume specifications.
Specifies power sources, consumption, and patient isolation characteristics of the system.
To Next Page
