What to do if my Aeroneb Go shows no visible aerosol even when the power source is on?
If your Aeroneb Respiratory Product is powered on but not producing visible aerosol, ensure the medication cup is filled with the prescribed medication. Another possible solution is to clean the Aeroneb Go.
Why is there no visible aerosol from my Aeroneb Go when using batteries?
If you're not seeing any aerosol when using batteries, make sure you've inserted the batteries correctly into the Control Module housing, matching the (+) and (-) markings. If that doesn't work, try replacing the batteries or using the AC/DC adapter. Also, verify that the cable is properly connected to both the nebulizer and the Control Module.
How to fix no visible aerosol when using AC/DC adapter with Aeroneb Go Respiratory Product?
If you're not getting any aerosol when using the AC/DC adapter, first ensure that the adapter is plugged into a working outlet and that the green light on the controller is illuminated. Also, double-check that the AC/DC adapter cable is correctly connected to the Control Module.
What to do if Aeroneb Respiratory Product has no visible aerosol when power source is functioning?
If your Aeroneb Respiratory Product shows no visible aerosol even when the power source is working, first, make sure you've filled the Medication Cup with the prescribed medication. If the issue persists, try cleaning the Aeroneb® Go.
General| Brand | Aeroneb |
|---|---|
| Model | Go |
| Category | Respiratory Product |
| Language | English |
Precautions for battery use, AC/DC adapter, sharing, supervision, and prescribed solutions.
Instructions for inserting batteries, connecting the cable, and turning on the control module.
To Next Page
