EU Declaration of Conformity
Manufacturer Aerotech, Inc.
Address 101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
Declares that the product:
Product
Standard BM and BMS motors (excluding VAC6 versions)
Model/Types
BM75, BM130, BM200, BM250, BM500, BM800, BM1400, BMS35, BMS60,
BMS100, BMS280, BMS465
To which this declaration relates, meets the essential health and safety requirements and is in
conformity with the relevant EU Directives listed below:
2014/35/EU Low Voltage Directive
EU 2015/863 Directive, Restricted Substances (RoHS 3)
Using the relevant section of the following EU Standards and other normative documents:
IEC 60034-1:2010 Rotating electrical machines
IEC 61010-1:2010 Safety requirements for electrical equipment for
measurement, control, and laboratory use
NOTE: Safe operation of the motor requires over speed
and over current protection. This could be done by
the connected controller / amplifier combination.
Authorized
Representative:
/ Norbert Ludwig
Managing Director
Aerotech GmbH
Gustav-Weißkopf-Str.18
90768 Fürth
Germany
Engineer Verifying
Compliance:
/ Matt Maurer
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
Date 9/12/2023
Hardware Manual BM/BMS
www.aerotech.com 7
To Next Page
