Aerpro AM7 Series - Page 13

SETUP MENU
Setting
Options
Functions
-
Touch to manually adjust SWC functions
Version
-
Software version of the radio.
Steering Wheel Controls
Factory Default No / Yes Touch to return to the factory setting
Open Source License
-
Displays license information
System Version - Software version of the radio
13
Touch “Others” on the Setup Menu display, then select for information and factory reset.
•
Others
* The Steering Wheel Controls are pre-programmed to suit Aerpro AM7X kits, and is not
required to be manually adjusted unless the user wants to customize these functions.
Steering wheel controls
Connect to the vehicles steering wheel control harness using the steering wheel control
cable. Contact your Aerpro dealer for details.
The Steering Wheel Control screen will allow you manually assign your steering wheel
controls to control your headunit.
This will only be required if your steering wheel controls are not working correctly.
1. Press Reset to begin the manually setting your Steering Wheel Controls.
2. When the icon is flashing, press the corresponding Steering Wheel Button, matching
the icon on the head unit to the steering wheel control. You will know a button is pressed
by a string of numbers/letters appearing underneath the button.
3. It will automatically move onto the next icon and wait for the next steering wheel button
to be pressed.
4. Repeat this process until you have programmed all your steering wheel controls.
5. If you don't have a corresponding button on your steering wheel, then simply tap the
next icon you want to program on the head unit.
NOTE: Not all buttons can be manually set in some vehicles.