RADIO MODE
To enter Radio Mode, touch “Radio” icon on the Main Menu
or
or
Auto Tuning
Press the seek icon ( ) on the TFT Monitor screen to increase / decrease the
tuning frequency one step at 0.05MHz increments for FM and 9KHz increments for AM.
Press and hold the seek icon ( ) on the TFT Monitor screen to seek the available
channel by increasing or decreasing the tuning frequency.
FM & AM
Touch the “FM1” or “AM1” on the screen to change among the following bands: FM1,
FM2, FM3 or AM1 and AM2.
Preset Stations
Six(6) stored stations for the current band appear on the screen, touch the preset directly
for use or press the number buttons located on the head unit.
Storing and recalling a Station
1. Select a station. (Example: FM1 103.6MHz)
2. Touch and Hold the desired preset number for 3 seconds to store the Radio station.
3. To recall a station select a Band (If needed).
4. Touch the preset button on which the corresponding radio station is stored or press the
number button on the Radio panel.
Setup Button
• AF (Alternating Frequency), enables the radio to automatically switch to an alternate
frequency broadcasting the same station when the initial signal weakens
• TA (Traffic Alert mode), is a feature that interrupts regular broadcast to provide traffic
updates and alerts.
• TP (Traffic Programme) shows the current radio station supports Traffic Alert Mode.
4
Seek down
Radio frequency
Seek up
AF and TA settings
FM Band button
AM Band button
Auto Store button
Keypad button
EQ Mode button
3
54 6 10
8
11 2
7
9
Preset station list
To Next Page
Loading...