Aerpro AM7X - Page 15

To Next Page

To Previous Page

Wired & Wireless CarPlay Operation

Wireless connection

1. Before using Apple CarPlay wirelessly, turn on the Bluetooth and WiFi function on the

compatible device

2. Navigate to the Bluetooth settings on your compatible device and select AM7X for

pairing

3. A pair message and a pairing request code may appear on your compatible device and

head unit. Click allow to accept

4. Apple CarPlay automatically displays on screen, if not press the home button,

press icon and press the Apple CarPlay icon

Wired connection

NOTE: We recommended that the wired connection method be used for new devices.

The park brake needs to be connected for Apple CarPlay to function.

1. Turn on Bluetooth and WiFi on your compatible device

2. Connect an Apple CarPlay compatible device to this unit via USB1 (CP/AA/USB Media)

3. A pair message and a pairing request code may appear on your compatible device and

head unit. Click allow to accept

4. An ‘Allow CarPlay with Aerpro while phone is locked’ message may appear on your

device. Click allow to accept

5. Click to enable wireless CarPlay or use USB only option

6. Once connection is enabled for wireless carplay, connection via the USB connection is

no longer required and wireless connection will be automatic

7. The Apple CarPlay automatically displays on screen, if not press the home button,

press icon and press the Apple CarPlay icon