How to replace edge cleaning bristles on Aerus Vacuum Cleaner?
To replace the edge cleaning bristles on your Aerus Vacuum Cleaner, first remove the old bristles and dispose of them. Then, attach the new bristles on each side, securing them with two screws on each side. Finally, replace all four screws to ensure they are securely in place.
What to do if my Aerus FreshEra won’t run?
If your Aerus Vacuum Cleaner isn't running, there are a couple of things to check. First, make sure the power cord is firmly plugged into the outlet. If it is, check your home's fuse or breaker. If a fuse is blown, replace it. If a breaker is tripped, reset it. If the issue persists after checking these, it's recommended to contact your nearest Aerus location for service.
Why does my Aerus FreshEra Vacuum Cleaner have low suction?
Low suction in your Aerus Vacuum Cleaner can stem from several causes. Ensure the filter bag is correctly installed. A full filter bag can also cause this, so replace it. Additionally, inspect the brushroll for wear and replace if needed. A broken or worn belt can also lead to suction problems, so consider replacing the belt.
How to stop dust escaping from my Aerus FreshEra Vacuum Cleaner?
If dust is escaping from your Aerus Vacuum Cleaner, the filter bag may be full, so replace it. Also, check to ensure the filter bag is installed correctly.
General| Type | Upright |
|---|---|
| Voltage | 120V |
| Filtration | HEPA |
| Power Source | Electric |
| Cord Length | 30 feet |
To Next Page
