AEV Bison - Remove Radiator Support Components; Connecting AEV Wiring Harness; Prepare and Route Wiring

3
AMERICAN EXPEDITION VEHICLES
8. Remove 1 M10 bolt on radiator support and SAVE (fig. 8).
9. Remove 1 M6 bolt on radiator support and SAVE (fig. 8).
10. Un-clip radiator overflow hose (fig. 8).
Figure 8
II. CONNECTING AEV WIRING HARNESS
1. Open Warn winch controller by removing QTY 4 bolts on bottom corners of controller (fig. 9).
Figure 9