Wait for a solid GREEN light on the SNAP.
3
Set the EQ values for the tire size (Example: 34.2”
Tires, Bass = 3, Mid = 4, Treb = 2.). Press the
combination below. PRESS and HOLD for 3 SECONDS.
Programming is complete when the horn sounds
twice. Unplug ProCal SNAP and store in vehicle.
4
SET +
SET -
RES
CANC
+
BRAKE PEDAL SET +
*During Programming: If the BRAKE INDICATOR flashes during programming,
immediately release the BRAKE PEDAL. Failure to release in time may cause
errors and warning lights. To resolve, try programming again paying attention
to the pedal and indicator.
To Next Page
Loading...