Need help?Do you have a question about the aFe Power 54-12208 and is the answer not in the manual?
Remove the seal trim on the front bumper rail as the initial step.
Remove T25 and T20 screws securing the top part of the front bumper.
Gently pull bumper forward to access press tabs for the driver side kidney grill.
Detach and remove the factory driver side kidney grill from the vehicle.
Remove the factory grill component from the air intake opening.
Install the aFe air scoop securely over the vehicle's air inlet.
Re-install the original factory grill back over the air inlet.
Attach and secure the provided retainer clip into its designated position.
Re-install the factory kidney grill onto the front bumper assembly.
Re-install the factory bumper screws and seal trim onto the front bumper rail.
Confirm all steps are completed. Your installation is now finished.
General| Brand | aFe Power |
|---|---|
| Manufacturer Part Number | 54-12208 |
| Product Type | Cold Air Intake System |
| Filter Material | Oiled Cotton Gauze |
| Reusable | Yes |
| Washable | Yes |
| Material | Aluminum |
| Color | Black |
| Tube Material | Aluminum |
To Next Page
