Need help?Do you have a question about the aFe Power 50-70009S and is the answer not in the manual?
Remove intake housing to access headlight backside and push off the center cap.
Connect the inlet scoop to the aFe POWER air intake housing.
Re-install housing into vehicle and install other intake system components.
Covers product warranty, terms, conditions, and claims process for aFe products.
The aFe POWER Momentum GT Dynamic Air Scoops are an advanced FLOW engineering product designed to enhance the performance of a Dodge Challenger R/T Scat Pack (V8-6.4L engine, years 2019-2020). This instruction manual, P/N: 50-70009S, outlines the steps for installation and provides important information regarding the product's use and warranty.
The primary function of the Momentum GT Dynamic Air Scoops is to optimize the airflow into the vehicle's engine. By installing these air scoops, the system aims to provide a more direct and efficient path for air to enter the intake, which can lead to improved engine performance. The design of the air inlet duct (Part Number 05-5070009B1) is specifically engineered to integrate with the existing vehicle structure, directing cooler, denser air from outside the engine bay directly into the intake system. This process, known as dynamic air scooping, helps to reduce intake air temperatures and increase the volume of air available to the engine, contributing to better combustion and potentially higher horsepower and torque output. The "Momentum GT" designation suggests a focus on maximizing airflow velocity and volume, which are critical factors in engine efficiency and power generation. The system is intended to work in conjunction with the vehicle's existing intake housing and other intake components, acting as a crucial first step in the air induction process.
The Momentum GT Dynamic Air Scoops are designed for a straightforward installation process, though it requires some interaction with the vehicle's existing components. The installation begins with the removal of the vehicle's intake housing to gain access to the backside of the headlight. A key step involves sliding one's hand through the back of the headlight and pushing off a cap on the center of the headlight, indicating a precise fit and integration with the vehicle's front end. Once access is gained, the air inlet scoop (component A) is connected to the aFe POWER housing. This connection is critical for ensuring a sealed and efficient pathway for air. The subsequent steps involve re-installing the housing into the vehicle, making sure the inlet scoop properly connects to the headlight hole. This connection point is vital for drawing in ambient air effectively. Finally, the remaining components of the intake system are installed according to their respective instruction sheets, completing the overall intake upgrade. The design emphasizes a seamless integration with the vehicle's aesthetics and existing structure, ensuring that the modification looks and functions as if it were an original part of the vehicle. The product is intended for use in the specified Dodge Challenger R/T Scat Pack models, ensuring compatibility and optimal performance for that particular application.
Maintenance of the aFe POWER Momentum GT Dynamic Air Scoops primarily revolves around ensuring the integrity and cleanliness of the air inlet duct and its connections. While the instruction manual does not detail specific maintenance steps for the scoop itself, it implicitly highlights the importance of proper installation and care for the entire intake system. The general terms of the warranty provide insight into expected maintenance practices. It states that "proper maintenance with regular inspections of product is required to insure warranty coverage." This suggests that periodic checks of the air inlet duct for any signs of damage, blockages, or loose connections are necessary. The scoop, being an external component that draws in air, could potentially accumulate debris or dirt over time. Therefore, occasional cleaning to ensure unobstructed airflow would be beneficial. Although not explicitly mentioned for the scoop, other aFe products, particularly filters, often require cleaning or replacement. If the air scoop is part of a larger intake system that includes a washable filter, then the maintenance of that filter would also indirectly contribute to the overall performance and longevity of the scoop system. The warranty also covers manufacturer's defects due to workmanship and material, provided the installation instructions are followed and the product is not subjected to improper installation, abuse, unauthorized repair, or alteration. This underscores the importance of correct initial setup and careful handling to prevent issues that might require maintenance or void the warranty. Retaining factory parts for future use is also advised, which can be useful for troubleshooting or returning the vehicle to stock configuration if needed. In case of any missing components or issues, customer support is available, which is a key maintenance-related feature for addressing product concerns.
General| Product Type | Air Filter |
|---|---|
| Brand | aFe Power |
| Part Number | 50-70009S |
| Reusability | Yes |
| Cleaning Required | Yes |
| CARB Exempt | Yes |
| Application | Automotive |
| Material | Cotton Gauze |
To Next Page
