aFe Power F-150 - REMOVAL; Remove OE Intake Assembly

Refer to Figure A for Steps 1-4.
Step 1: Disconnect the Temperature sensor plug from stock tube. 1
Step 2: Loosen the OE intake clamps using an 8mm nut driver from the left and right side runners. 2
Step 3: Unclamp the top portion of the OE airbox. 3
Step 4: Remove the OE intake and the top portion of the OE airbox by pulling straight up and out of the
vehicle.
REMOVAL
Page 4
Figure A
2
2
3
1