iI_ ii_i i
5
_ i i i I
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i / _ii
2.0 AS rev 1.2.indd 24-25
Yourhomegym is designedto be reliable and easyto use.However,if you experbncea problem,please reference
the troubleshootingguide listed below.
PROBLEM:Thecables feelrough and are noisyduring use.
SOLUTION: Verifythefoflowing-
IS THEREANYNOTICEABLEDAMAGETOTHECABLES?
IF YES..
,' Contactcustomer techsupport and replace the cable(s).
IF NO:
, Verifythat all cables are securedinto thepulleys.
o Verifythat the weight stack guiderods are lubricated.
o Verifythat there is noexcessiveslack in the cables.
NOTE:If there is excessiveslack adjust cable tension (seenextpage)
PROBLEM: Weightselectorph7cannot be hTserted.
SOLUTION,: Verifythe foflowing-
ARETHEHOLESALIGNEDTHROUGHTHEWEIGHTPLATEANDBAYONET?
IF YES:
Verifythat the selectorpin isn't bent or damaged.
IF NO:
, Adjust threadedbolt on topplate so that the holesin the bayonetalign with the weightplate.
NOTE:Alwaysmaintain at least ½"of weight cable screwthreadedinto bayonetfor safety.
the problem;discO,tin' use.
Thefollowing information may be askedof you whenyou call. Pleasehave these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer TechSupport to serviceyour homegym they may need to ask detailed questions about the symptoms that are
occurring. Sometroubleshooting questions that may be asked are:
• flow long has this problem been occurring?
• Does this problem occur with everyuse?Withevery user?
• If you are hearing a noise, doesit come from the front or the back? Whatkind of noiseis it (thumping, grinding, squeaking,
chirping etc.)?
• flas the machine beenlubricated and maintained per the maintenance schedule?
Answering theseand other questions will give the technicians the ability to send proper replacement parts and the service necessary
toget you and your AFGhomegym functioning again!
ii! :
Cleanfinessofyour homegym and its operation environmentwill keep maintenanceproblemsand service calls to a
minimum. Forthis reason,werecommendthat the following preventivemaintenance schedulebe followed.
AFTEREACHUSE(DALLY)
o Wipeupholstery,hand grips, bars, and frame (if needed)with a mild cleaning solution.
EVERYWEEg
, Lubricateguide rods with a spray or gel silicone lubricant.
o Inspect cableends and cable insulation for damage.
EVERYMONTH-IMPORTANT!
o Inspectall frame bolts and tighten as needed.
Pleasecontact AFGwith questions about applyinglubricant to yourhomegym.
ADJUSTINGCABLETENSION
Regularlycheckthe cable tensionof your homegym. If excessiveslack
exists adjust cable tensionbyremoving thepulley bolts and moving
oneorboth pulleys to the inner mounting position in the dual floating
pulley bracketand then reinstalling thepulley bolts. Cabletension
mayalsobe adjusted using the threaded cablescrew onsingle pulley
bracket and weightstack. Twistthreadedscrew toadjust tensionand
thentighten lock nut.
NOTE:Alwaysmaintain at least ½"of threaded bolt in bayonet.
INNER
MOUNTING
POSITIONS
TWISTSCREWTO _ CABLESCREW TWISTSCREWTO _;;;_ CABLESCREW
ADJUSTTENSION,_._J_AND NUT ADJUSTTENSION, _ ._J_AND NUT
THENTIGHTEN THENTIGHTEN
LOCKNUT LOCKNUT
"_SINGLE PULLEY
BRACKETTHREAD
BAYONET
0°POSITION
FRONTORBACKACCESS
300POSITION
FRONTORBACKACCESS
1500POSITION
FRONTORBACKACCESS
900POSITION
LEFTORRIGHTACCESS
Thishomegym allowsyou to choosetheangle of access to the weight selectionpin dependingonhowyou install the
upperand lowermounting brackets, weight plates, and weight shrouds.
NOTE:Makesure the upperand lower mounting bracketare in the sameposition.
/
i ii
i ii i
12/28/07 10:16:50 AM
To Next Page