GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or break down, grounding provides a path of least resistance
for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with local codes and ordinances.
DANGER
ImPrope[ connection 0fthe equipment:gr0Unding Conductor can result in aiisk of electric sh0ckl check With a qualified
electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the pug provided
with the product. If it wi!l not fit the outlet, have a proper out!et insta!!ed by a qua!ified electrician, ............
This product is for use on a nominal 110-120 Volt circuit and has a grounding plug that looks like the plug in the illustration. Make
sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this
product.
This product must be used on a dedicated circuit. To determine if you are on a dedicated circuit, shut off the power to that circuit and
observe if any other devices lose power. If so, move devices to a different circuit. Note: There are usually multiple outlets on one
circuit. This treadmill should be used with a minimum 15-amp circuit.
3-POLE
GROUNDED
OUTLET
_dlNG PIN
WARNING
ConneCt t his exercise pi0duct tO a p[0Pedy grounded Outlet 0nlyl
Never 0perate Pi0duct With a damaged €0id or p!ug even if it is W0rking
properly. Never 0Perate any PrOduct if it appears damaged, or has been
immersed in waterl Contact customer Tech SupPOrt for replacement oi repair,
To Next Page
