2015 AFG Baby Furniture H309 Assembly Sheet ©
7
H309 Crib Assembly Sheet
STEP 3
a. Attach Mattress Support (I) flat side up by swinging out the four hangers at the
corners of the mattress support and use 4 Bolts (#3) to attach hangers to the
brackets on the legs at an even level on all sides.
WARNING:
Make sure that the warning envelope on the
Mattress Support Frame is facing up.
WARNING:
Check components periodically, make sure
bolts are tightened properly and securely.
Warning
Envelope
Face Up
To Next Page
Loading...