afloia MAX User Manual

AIR PURIFIER
Model:Max
ank you ve o o
Please read the user manual care e,and keep it fo e reference
ongsha a d
BF6 No.6 anjiao To ongsha angdong a
CONTE NT POINTS FOR ATTENTION
Before using, please read this user manual carefully and keep it for future
reference.
Points for Attention - -« === === -semsania s 01 m
Product Overview - «---x-xrorosmsrosomzromoee oo 03 1. To avoid electric shock and fire,do not allow water, liquid or any flammable
s ficati detergent to get into or to clean the product.
pecifications -«x-sxosrosrosrosonososono o ee 05 2. Do not spray any flammable materials such as pesticides or perfumes
R Filter Pack. around the product.
emove Filler Package - -o-orormrrren e 06 3. Before connecting the power supply, please check whether the voltage of
. . the product is consistent with the local power supply voltage.
Function Instruction == === -ceemmmmmmmn e
07 4. If power cord is damaged, in order to avoid danger, it must be replaced by
. professional staffs.
Maintenance ------oscossosnsnsn s 10 5. Please stop using if the plug, power cord or product is damaged.
6. Keep the air inlet/outlet free from being blocked.
FAQ - cvvrmmmmmmi s 1 7. Person with physical or mental disability, or without relevant experiences
and skills(including children)should use it under guiding and instructing.
8. This product can not replace normal ventilation, daily dust collection or oil
pumping when cooking.
9. Ensure the product socket is well connected with plug. If not, the plug will
be hot.
10.Do not place any items above the product.
01
PRODUCT OVERVIEW
11. Be sure to place and use the product on a firm, flat and horizontal surface. Components
12. Leave at least 30cm of space on the back and sides of the product, and at
least 50cm of space above the product when using.
13. Do not place the product under air conditioner to prevent condensation
water dropping into the product.
14. Ensure both the filter and the back cover are properly installed before Control Panel
connected
power.
Air
Outlet
Light
Box
15. Please use the filter specially designed for this product.
16. Do not take the filter as fuel or similar purposes to avoid irreversible harm. Body — I— Laser Sensor
17. Do not use hard objects to strike the products, especially the air outlet and
airinlet.
18. Do not insert finger or other things into the air outlet/inlet to prevent physical
damage or trouble. Air Inlet
19. Do not use this product when you are using an indoor spray repellent, or in
a place filled with grease, flammable gas or chemical fumes.
20. Ensure the product is unplugged before moving, cleaning, maintaining and
replacing filter.
Filter Back Cover
02 03
SPECIFICATIONS
Model No. Max
Size L270* W303* H497 mm
Input AC120V 60Hz
Power 50W
Noise <56dB
Coverage area <=50m
Weight 4.6KG
. AUTO H M € 2H aH eH .
| ONIOFF | MODE | TIMER | LIGHT |
ON/OFF MODE TIMER
Power Button Wind Speed Button Timer Button
LIGHT B
Light/Child lock Button Filter Button
04 05
@ Press the red circle switch
to take out the back cover.
@Put the filter into the machine.
REMOVE FILTER PACKAGE
Before using, please remove the package of the filter.
Ensure the machine is unplugged before removing or installing the filter.
Packaging
=> Open
@ Remove the filter from
the machine.
@ Remove the packaging
of the new filter.
© Press the red circle switch
button to close the back cover.
FUNCTION INSTRUCTION
Connect the power, all indicators will be on for 1s and then off. After that,
the machine will be in standby mode.
Button Operatiol
Power Button
(D Press the power button, the machine turns on at mid default mode, meanwhile,
the buzzer rings for one time.
(2 The indicator light will be changed among the color circulation of Blue-Cyan
- Green - Yellow - Orange - Red - Purple, which will last 30s for preheating.
After 30s, the indicator light will be influenced by the air quality. (Blue means
good air quality, yellow means average quality, red means poor air quality.)
The digital display will show the PM2.5 numerical according to the air quality.
3 Press again to turn off the machine, all the lights will be off, then the machine
is in standby mode.
Wind Speed Button
In the condition of working, press the Wind Speed Button to adjust the wind
speed among the circulation of Auto-H-M-S grade, and the corresponding
indicators will be on.
(DAuto Mode
The wind speed will be adjusted according to the air quality. And the wind
speed will auto-change according to the air quality among high mode, middle
mode and sleep mode.
06 07
(2High Mode Light / Child lock Button
When the machine works in a High Mode, the corresponding indicator will be on. In the condition of working, press the Light Button, the indicator will be on.
Every time you press it, the buzzer will ring for one time, and the light will be
(3Middle Mode changed among Soft - Standard - Off mode.
When the machine works in a Middle Mode, the corresponding indicator will be on. (Notice: In the condition of shutdown, the light adjustment can't be operated.
During the first 30s preheating period, the Light Button just could be operated
@Sleep Mode between on and off mode.)
When the machine works in a Sleep Mode, the corresponding indicator will be on. In the condition of working, press the Light/Child lock button for 3s to start the
If there has no operations for 5s. The power indicator and sleep indicator will be on Child lock function, the indicator will be on. Press again for 3s, the buzzer will
slightly. The sleep indicators will be on again after touching any button. ring for one time then the indicator will be off to unlock this function.
. (Note: Any functions cannot operated in the mode of Child lock function unless
Timer Button you long press this button to unlock it.)
(@ Inthe condition of working, press the Timer Button to set timer among the circulation .
of 2H, 4H and 8H. Every time you press the the button, the buzzer rings for one Filter Button
. :lmi, antd the iorrespolli\ng |nd:atorbww\l ?e on. ! Whenthe time Reminder of Replacing Filter
= : the s :tus o."nmmg, :.mac :jneu I.eghams.:‘obcou; do;lvnh. enh °© llr.||';ebls.up In the condition of working, when the machine detects the filter is saturated
t‘e Esc |nedW| stop working and all lights will be off, and the machine will be in after running for 2200 hours, the filter indicator light will keep flashing in red.
standby mode- Long press the Filter Button for 7s to stop flashing light and to reset after
installing a new filter.
(Notice: The machine still works normally even in the reminder of replacing filter.)
08 09
MAINTENANCE FAQ
Notice:
+ Ensure the machine is unplugged before maintenance. SITUATION REASON
+ Do not immerse the air purifier into water or any liquid. e Is it plugged into a power socket? Is there a power outage?
« Do not use abrasive, corrosive or flammable cleansers (such as bleach or No working @ Is the home leakage switch or fuse cut off?
alcohol) to clean any part of the unit. o Is the filter replacing indicator keep flashing?
+ Clean the filter regularly. Do not wash or reuse the filter. o Is there any dust in the surface of primary filter?
Poor performance i
« Ensure the machine is unplugged before replacing the filter. @ Is there any obstacle blocking the air inlet/outlet.
* Please sterilize the filter under sunlight regularly. o s there anything stuck on the fan in the air outlet?
+ Do not use a vacuum cleaner to clean the filter or wash it directly. Significant noise © Is the machine tilted? X
o Please set a lower grade of wind speed if the noise is too loud ,
or set low grade of wind speed when using in bedroom at night.
Cleaning & Storage
- © Itis the normal phenomenon that the machine emits the smell
(1 Ensure the machine is power-off and unplugged. of plastic for the first time.
(@) Take out the filter to clean any dust from the surface of it. Coming out The machine will emit nasty smell if the filter is dusty, in this
- nasty smell case, please clean or replace the filter.
@ Use a soft cloth with nelfiral cleanser to clean away any dust or debris from o If the buming smell emits from the machine, please unplug the
the surface of the machine. power socket and contact with buyer or customer service.
P o . y
\Af) After the filter is dried, install it into the air purifier to restart. The reminder of
®) If you do not use the machine for a long time, ensure the machine is dry out, replacing filter is sitll ® Please press the Filter button & for 7s to reset the machine
put on the dust cover bag and place it in a cool and well-ventilated place. ‘::;!'c"eg;:i;“wsz;‘e and the life counter of the filter will start.
(© To ensure a good performance of the machine, please turn on the machine
for a few minutes from time to time.
Notice: If the above FAQ can not solve your problems and need maintenance, please contact
. y . . . the supplier or after sales service center. Please do not disassemble the machine to maintain
Notice: Please don't drop any water into the machine when clean the air outlet.
by yourself.
10 1

afloia MAX Specifications

General

Model	MAX
Timer	Yes
Air Quality Indicator	Yes
Child Lock	Yes
Filter Type	HEPA filter

Summary

Points for Attention

General Safety Warnings

Crucial safety guidelines covering electrical hazards, flammable materials, proper usage, and handling.

Product Overview

Components

Identification and labeling of the main parts of the air purifier, including body, filter, and control panel.

Control Panel

Detailed explanation of the buttons and indicators on the control panel for operation.

Specifications

Remove Filter Package

Function Instruction

Button Operation

Guide to operating the air purifier using its various buttons like Power, Mode, and Timer.

Power Button

Details on how to turn the unit on/off, and the indicator light behavior during operation.

Wind Speed Button

Explanation of how to adjust the fan speed through different modes like Auto, High, Middle, and Sleep.

Timer Button

How to set and use the timer function for automatic shut-off.

Light / Child lock Button

Instructions for adjusting light settings and activating/deactivating the child lock feature.

Filter Button

Guidance on the filter replacement reminder and how to reset the indicator light.

Maintenance

Notice

Important precautions and guidelines for performing maintenance tasks safely and effectively.

Cleaning & Storage

Steps for cleaning the unit and filter, as well as advice for long-term storage.

FAQ