AFN7500HD User Guide
Power Cord Protection: Place the power supply cord out of the way, where it will not be walked on. Please take special attentions to
cords at plugs, convenience receptacles and the point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this Decoder through openings, as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill any liquid on the Decoder.
Note: Moisture may be formed inside the unit in the following conditions:
1. When the unit is suddenly moved from a cold environment or an air-conditioned room to a warm place.
2. Immediately after a heater has been turned on.
3. In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this problem, turn on the power and wait about two
hours for the moisture to evaporate.
Parts Replacement: When parts need to be replaced, user should make sure the service technician use the replacement parts
specified by the manufacturer or having the same characteristics as the original part. Unauthorized replacement may put the unit in
the risk of fire, electric shock or other hazards.
Any decoder being sold or transferred should be reset to factory default settings to eliminate any PIN, Channel Lock, or other user
preferences.
To Next Page
Loading...
