AFN7500HD User Guide
Satellite Setup
The Satellite Setup settings can be found under [Menu] > ‘Settings’ > ‘Installation’ > ‘Satellite Setup’.
The ‘Satellite Setup’ submenu can be used to connect the AFN Decoder to one of the supported Satellites.
Warning, reconfiguring the Satellite could delete your current channel and favorites list.
First, you will be prompted to enter your PIN number. The default pin from the factory is 0-0-0-0.
Now, you must select the ‘Satellite’ to connect to and choose the ‘Transponder’ and ‘DiSEqC11’ settings. Select ‘Continue’ to move
forward.
To Next Page
Loading...
