What to do if my AG Neovo SC-2202 has image ghosting?
If faint shadows from a static image appear on your AG Neovo Monitor screen, turn off the monitor for extended periods of time. You can also use a screen saver or a black and white image and run it for extended periods.
Why AG Neovo Monitor has no audio output?
If there is no audio output from your AG Neovo Monitor, verify that the volume is not set to 0 or if mute is enabled. For VGA input, also check the audio settings on your computer.
What to do if the displayed texts are blurry on AG Neovo SC-2202?
If the text appears blurry on your AG Neovo Monitor, and you are using VGA input, try the following: * Press the 2 or AUTO button on the control panel to auto-adjust the screen. * Adjust the “CLOCK” and “PHASE” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
Why is the image position incorrect on my AG Neovo SC-2202 Monitor?
If the image position is incorrect on your AG Neovo Monitor when using VGA input: * Press the 2 or AUTO button on the control panel to auto-adjust the screen. * Adjust the “H. POSITION” and “V. POSITION” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
What to do if my AG Neovo SC-2202 Monitor has faint shadows from a static image?
If you notice faint shadows from a static image on your AG Neovo Monitor, try these solutions: * Turn off the LCD monitor for extended periods when not in use. * Use a screen saver or a black and white image and run it for extended periods of time.
What to do if LED indicator is green on AG Neovo SC-2202 Monitor but there is no picture?
If the LED indicator on your AG Neovo Monitor is green but there is no picture, ensure that the computer is turned on. Also, check if the computer is in standby mode; if so, move the mouse or press any button to wake it up.
How to fix no audio output on AG Neovo Monitor?
If there is no audio output from the AG Neovo monitor, check if the volume is set to 0 or if mute is on. For VGA input, check the audio setting of the computer.
Why is there condensation on my AG Neovo SC-2202?
If dew has formed on your AG Neovo Monitor, this typically happens when the monitor is moved from a cold to a hot room. Do not turn on the monitor; wait for the dew condensation to disappear.
How to adjust the screen position on AG Neovo SC-2202 Monitor?
If the image position on your AG Neovo Monitor is incorrect, and you are using VGA input, press 2 on the control panel to auto adjust the screen. Alternatively, adjust the “H. POSITION” and “V. POSITION” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
Why is my AG Neovo SC-2202 LED green but no picture?
If the LED indicator on your AG Neovo Monitor is green but you have no picture, ensure your computer is turned on. Also, check if the computer is in standby mode; if so, move the mouse or press any button to wake it up.
General| Screen Size | 21.5 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Aspect Ratio | 16:9 |
| Viewing Angle (H) | 170° |
| Viewing Angle (V) | 160° |
| Input Connectors | VGA |
| Input Ports | VGA, DVI |
To Next Page
