What to do if my AG Neovo SC-2402 Monitor has no picture and the LED indicator is off?
If your AG Neovo Monitor displays no picture and the LED indicator is off, please verify the following: * Ensure the LCD monitor is turned on. * Check that the power cord is properly connected to the LCD monitor. * Confirm the power cord is plugged into the power outlet.
Why AG Neovo SC-2402 has no audio output?
If there is no audio output from your AG Neovo Monitor, verify that the volume is not set to 0 or if mute is enabled. For VGA input, also check the audio settings on your computer.
What to do if the displayed texts are blurry on AG Neovo Monitor?
If the text appears blurry on your AG Neovo Monitor, and you are using VGA input, try the following: * Press the 2 or AUTO button on the control panel to auto-adjust the screen. * Adjust the “CLOCK” and “PHASE” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
Why is the image position incorrect on my AG Neovo SC-2402 Monitor?
If the image position is incorrect on your AG Neovo Monitor when using VGA input: * Press the 2 or AUTO button on the control panel to auto-adjust the screen. * Adjust the “H. POSITION” and “V. POSITION” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
What to do if my AG Neovo SC-2402 Monitor has faint shadows from a static image?
If you notice faint shadows from a static image on your AG Neovo Monitor, try these solutions: * Turn off the LCD monitor for extended periods when not in use. * Use a screen saver or a black and white image and run it for extended periods of time.
What to do if LED indicator is green on AG Neovo SC-2402 Monitor but there is no picture?
If the LED indicator on your AG Neovo Monitor is green but there is no picture, ensure that the computer is turned on. Also, check if the computer is in standby mode; if so, move the mouse or press any button to wake it up.
What to do if dew formed on the AG Neovo SC-2402?
If dew has formed on your AG Neovo LCD monitor, this usually occurs when the monitor is moved from a cold to a hot environment. Do not turn on the LCD monitor. Wait for the dew condensation to disappear before using it.
What to do if my AG Neovo SC-2402 has no picture and the LED is off?
If your AG Neovo Monitor shows no picture and the LED indicator is off, first, ensure the monitor is turned on. Next, check that the power cord is properly connected to the monitor and plugged into the power outlet.
Why is there no audio from my AG Neovo SC-2402?
If there is no audio output from your AG Neovo Monitor, first check if the volume is set to 0 or if mute is enabled. For VGA input, also verify the audio settings on your computer.
Why is my AG Neovo SC-2402 Monitor LED green but no picture?
If the LED indicator on your AG Neovo Monitor is green but you have no picture, ensure your computer is turned on. Also, check if the computer is in standby mode; if so, move the mouse or press any button to wake it up.
General| Screen Size | 23.8 inches |
|---|---|
| Panel Type | VA |
| Brightness | 250 cd/m² |
| Connectivity | VGA, HDMI, DisplayPort |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178°/178° |
To Next Page
