How to fix blurry text on AG Neovo SC-2402?
If the displayed texts on your AG Neovo Monitor are blurry, and you are using VGA input, press 2 on the control panel to auto adjust the screen. Alternatively, adjust the “CLOCK” and “PHASE” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
How to adjust the screen position on AG Neovo SC-2402 Monitor?
If the image position on your AG Neovo Monitor is incorrect, and you are using VGA input, press 2 on the control panel to auto adjust the screen. Alternatively, adjust the “H. POSITION” and “V. POSITION” settings in the “VIDEO ( ) > AUTO ADJUST” menu.
What to do if my AG Neovo SC-2402 has image ghosting?
If faint shadows from a static image appear on your AG Neovo Monitor screen, turn off the monitor for extended periods of time. You can also use a screen saver or a black and white image and run it for extended periods.
Why is there condensation on my AG Neovo SC-2402 Monitor?
If dew has formed on your AG Neovo Monitor, this typically happens when the monitor is moved from a cold to a hot room. Do not turn on the monitor; wait for the dew condensation to disappear.
Why do red, blue, green, white dots appear on the AG Neovo Monitor screen?
It is normal for a few transistors to be damaged and to produce spots because there are millions of micro transistors inside the AG Neovo LCD monitor. This is acceptable and is not considered a failure.
General| Screen Size | 23.8 inches |
|---|---|
| Panel Type | VA |
| Brightness | 250 cd/m² |
| Connectivity | VGA, HDMI, DisplayPort |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178°/178° |
To Next Page
