AG 150 - Page 6

Fitting / Attaching AG
ATTACHING THE LOADER
Ensure the AG Dispenser is placed on the ground in a stable
Hose lengths will need to be made, the length dependant on the style of machine used.
Ensure that the AG Dispenser operates in both
and that the operator is satisfied that the leaver control action is compatible with the
direction of movement of the
AG
IMPORTANT: If the AG Dispenser mounting brackets are to be welded to the rear
frame of the machine, it is absolutely vital that a professional welder carries out all
the welding. The material to be welded must be pre
checked carefully. (See Fig.1.)
CAUTION!
machine is clear of spectators. The operator must stay in the
prime mover during work of the AG Dispenser.
Fig 1.Welded Mounting Bracket
IMPORTANT
: If the AG Dispenser is to be used with Bolt on Brackets, these must be
supplied
from your local AG dealer. BOLTS are to be checked every 50 hours.
6
Fitting / Attaching AG
Dispenser
ATTACHING THE LOADER
-
Ensure the AG Dispenser is placed on the ground in a stable
position.
Hose lengths will need to be made, the length dependant on the style of machine used.
Ensure that the AG Dispenser operates in both
directions
before filling with material,
and that the operator is satisfied that the leaver control action is compatible with the
AG
Dispenser.
IMPORTANT: If the AG Dispenser mounting brackets are to be welded to the rear
frame of the machine, it is absolutely vital that a professional welder carries out all
the welding. The material to be welded must be pre
-
treated and the final wel
checked carefully. (See Fig.1.)
CAUTION!
Ensure that the immediate area surrounding the
machine is clear of spectators. The operator must stay in the
prime mover during work of the AG Dispenser.
Fig 1.Welded Mounting Bracket
Fig. 1a Typical Bolted Mounting Brackets
: If the AG Dispenser is to be used with Bolt on Brackets, these must be
from your local AG dealer. BOLTS are to be checked every 50 hours.
position.
Hose lengths will need to be made, the length dependant on the style of machine used.
before filling with material,
and that the operator is satisfied that the leaver control action is compatible with the
IMPORTANT: If the AG Dispenser mounting brackets are to be welded to the rear
frame of the machine, it is absolutely vital that a professional welder carries out all
treated and the final wel
ds
Ensure that the immediate area surrounding the
machine is clear of spectators. The operator must stay in the
Fig. 1a Typical Bolted Mounting Brackets
: If the AG Dispenser is to be used with Bolt on Brackets, these must be
from your local AG dealer. BOLTS are to be checked every 50 hours.