Assembly Instructions
Step 3:
Step 4:
Insert a leg brace (E) into two
leg posts (D) and tighten with
two self-tapping screws (X).
Now insert both leg posts into
the T-joint and socket of one of
the assembled sections at the
same time. Tighten with two
self-tapping screws.
Repeat this step until you
have all 6 frame pieces
assembled.
This step is a breeze! (But it is a good idea
to grab a friend to help). Just flip the 6
frame pieces so that the legs are now
supporting the frame. Now connect 2
frame pieces together. Continue connect-
ing frame pieces until you have a
free-standing frame. (And it might even
resemble a trampoline now!)
Remember: Make sure the T-joints and
sockets are alternating!
Page 9 of 22
To Next Page
Loading...
