Assembly Instructions
Step 5:
Step 6:
WARNING:
Trampoline and enclosures are susceptible to winds, secure your
trampoline and enclosure. Wind damage is not covered in the
warranty of your trampoline.
Winter months can damage your soft materials. Please remove
and properly store during the winter season.
For further information, consult your user manual.
Part #: 7028
Description: 16 Foot Mat
Made in China
Factory address: Wei Jia Tun Village Ligezhuang
town Jiaozhou city Qingdao China
Model: XXXXXX
Place the jump mat on the ground. The warning label should be on the top, and
the ID label should be on the back.
Now place the enclosure net (F) on the jump mat (G), and make sure the first
hole (the hole directly to the left of the enclosure door zipper) and the first
V-ring (the V-ring directly to the left of the warning label) line up. Now insert the
first V-ring into the first hole. Then, insert the remaining V-rings into their corre-
sponding holes. Once you’ve finished, the enclosure net should be fully
attached to the jump mat.
Page 10 of 22
To Next Page
Loading...
