AGCO FENDT 1038 Vario S4 User Manual

Fault code
DIN brief description Cause Consequences Remedy
Integrated pressure controller of the 1Z1 air dryer with integrated pressure controller incorrectly configured or faulty; - 2V1 overflow valve for isolation of tire pressure from control pressure faulty
12.1.55
A087 tire pressure monitoring system
(TPMS)
Supply pressure of TPMS block not in valid range 2V2 pressure reducing valve, control pressure incorrectly configured or faulty
The axle that has detected the fault is blocked.
12.1.B0
A087 tire pressure monitoring system
(TPMS)
Invalid parameters in EEPROM EOL programming faulty
EOL programming
12.1.F0
A087 tire pressure monitoring system
(TPMS)
Incorrect check sum for the first 128 bytes in the EEPROM EOL programming faulty
EOL programming
12.1.F1
A087 tire pressure monitoring system (TPMS)
Invalid GD routing table EOL programming faulty
EOL programming
12.1.FE
A087 tire pressure monitoring system (TPMS)
Faulty hardware (e.g. RAM or Flash)
3. Faults and remedy
Maintenance 211
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English