ageLOC GALVANIC SPA - ageLOC Nutriol Scalp & Hair Serum; Preparation and Serum Application; Scalp Massage and Treatment; Galvanic Scalp Treatment Process

18 19
ageLOC Nutriol
Intensive Scalp & Hair Serum
Setting Conductor
Use this eortless ritual morning and night to help revitalise the
scalp day after day and make hair look and feel divine.
GS 
Preparation: Use on towel-dried or dry
hair. Attach the Scalp Conductor to the
device

Figure 1).
step 1: Spray ageLOC Nutriol Intensive
Scalp & Hair Serum directly onto the scalp
and roots by parting hair

Figure 2).
Pro Tip: Slightly spraying water on dry hair
before applying ageLOC Nutriol Intensive
Scalp & Hair Serum may make your hair
easier to manage for your application.
step 2: Use fingers to gently massage the
serum into scalp and roots

Figure 3). Comb
away any unruly strands

Figure 4).
Push the selection button until the number 5
is lit on the display

Figure 5). This
application will take 2 minutes.
step 3: Thoroughly wet hands with
NaPCA Moisture Mist or water. Hold
the device with a moistened hand while
touching the chrome plate on the back.
Touch the conductor directly to the
scalp and move from the front of your
hairline backward, keeping in constant
contact with the scalp

Figure 6).
The device will beep once, twice, or
three times to indicate that it has automatically adjusted to
your skin. After this, your galvanic application has begun, and
the device will beep every 10 seconds to indicate the unit is
on and working, and every 5 seconds when your application is
almost complete.
Note: During galvanic application, keep Scalp Conductor in
constant contact with the scalp
step 4: When your galvanic application is over, the device will
emit a long beep followed by two short beeps and automatically
turn o.
Do not rinse hair. Style as usual and
remove any remaining product from
the device with a damp towel

Figure 7).

Figure 5
Figure 2
Figure 3
Figure 4
Figure 7
Figure 6
EN EN
Figure 1