9
• Prior to placing your ageLOC® LumiSpa™
device in the charging base, make sure your
device and head are completely dry.
• Plug the detachable power cord into the
charging base. Plug the detachable power
supply into an outlet and charge your device for
at least 12 hours. When used as recommended,
the fully charged device should last 7 to 10 days.
Do not use the plug-in detachable power supply
in a wet environment.
• When you place your device in the charging
base, the lights on the ageLOC® LumiSpa™
handset will radiate for a short time and the On/
O button will remain lit. Then, the On/O
button will pulse slowly, indicating the device is
charging.
• The On/O button will remain lit when the
device is fully charged.
To Next Page
Loading...
