95
POOR PRINTING QUALITY
POOR PRINTING QUALITY
1. Check the negative air pressure: Regulating within the range of graduation in the
sticker of each part.
2. Check the voltage of head jetting : Check and regulate each head voltage.
3. CALIBRATION CHECKING (BI, FEED)
4. CARRIAGE SPEED CHECKING: It is possible to have printing deterioration in a
speed that is faster than setting speed. (Max speed 10, Quality speed 7)
5. Adjust height of HEAD BASE and check the evenness of platen
6. If the ink is not curing, it is caused by LV Lamp.
Æ Check the power of UV Lamp and check the cooling time.
* List of Notice:
Since the UV Lamp generate a heat, any media that is weak
to the heat can cause the serious damage to the Head by waving of media.
Therefore, when printing out, should set setting interval between each media.
To Next Page
