AGFA Avalon N - Update Media Configuration in Apogee Prepress; Adjust AvalonN Device Settings; Add and Describe New Media

3 of 6
AvalonN Add a Plate
Congure Apogee Prepress for a new plate size
Update the Media in Apogee Prepress
At Apogee Prepress, go to System Overview and click on the AvalonN TP. Open the conguration window.
Change the number of printing machines to reect the one just added and click OK.
Right click on the AvalonN and choose Restart to reboot the AvalonN device.
In the Message window, verify the correct plate type (positive or negative) is checked, then click Add to add
the media size. Open the Media resource and verify the plate type matches the others and is loaded into the
new Printing Machine.