In case of power failure, the batteries of the UPS supply power to the
digitizer, the NX workstation and monitor.
Full Leg Full Spine Application Components
• CR Full Body Cassette Holder
• Anti-scatter grid (optional)
• CR EasyLift
TM
(optional)
For more information and instructions on the FLFS application, refer to the
document 4408, “CR Full Leg Full Spine User Manual”.
Cassette adapter
The cassette adapter is required for using a 24 cm x 30 cm cassette, depending
on the digitizer model.
Figure 1: Cassette adapter
Related Links
Cassette formats on page 78
14 | CR 10-X, CR 12-X, CR 15-X | Introduction
2491E EN 20150409 1543
To Next Page
