Need help?Do you have a question about the AGFA CR 85-X and is the answer not in the manual?
Explains the meaning of warning, caution, and note symbols used in the document to ensure safe operation.
Outlines general safety instructions for operating, maintaining, and connecting the CR 85-X to avoid hazards.
Provides step-by-step instructions for powering on the CR 85-X digitizer, including pre-operation checks.
Details the procedure for safely switching off the CR 85-X digitizer at the end of the day.
Explains how to interpret and respond to error messages and status indicators like Warning, Locked, and Error.
Provides step-by-step instructions for clearing jammed cassettes from the input or output buffer of the CR 85-X.
Details how to clear jammed image plates, including identifying locations and recovery procedures.
General| Spatial Resolution | Up to 10 pixels/mm |
|---|---|
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Connectivity | DICOM 3.0 |
| Type | Computed Radiography System |
| Cassette Sizes | 14x17, 10x12 inches |
| Imaging Plate Size | 35 x 43 cm, 35 x 35 cm, 24 x 30 cm, 18 x 24 cm, 15 x 30 cm |
To Next Page
