31
between the camera lens and subject.
2. Camera moved: Hold the camera steady while taking the picture. When
flash is on, hold the camera steady until flashes have fired two times. (First
flash is to reduce a red-eye phenomenon and to detect the brightess of the
target).
6.4 Subject in recorded image is too dark
Insufficient light for shooting: Set the flash on, or adjust the exposure
compensation to a positive (+) setting.
6.5 Flickering on LCD screen or recorded image
Incorrect frequency setting: Check the correct anti-flicker frequency (50Hz
or 60Hz) under fluorescent light setting.
6.6 Picture download problem
1. Computer does not recognize camera for Windows 98SE, camera driver
has to be installed first before picture downloading. In picture preview
mode, ensure that USB mode is set to MSDC before connecting the
To Next Page