AgfaPhoto DC5100 - Camera Settings (Exposure, ISO, White Balance)

17
To set up these settings, press MENU key and then Left / Right keys to select the icon
Exposure
This setting allows you to control the brightness of your photos.
1. Press Up / Down keys to select Exposure in Setup menu.
2. Press OK key enter the Exposure submenu.
3. Press Up / Down keys to select an exposure value from +3 to -3.
4. Press OK key again to confirm and return to camera mode.
5. The exposure icon will then be displayed on the LCD screen.
ISO
It is better to activate this setting if the shooting brightness is low and flash using is not
possible.
1. Press Up / Down keys to select ISO in Setup menu.
2. Press OK key to enter the ISO submenu.
3. Press the Up / Down keys to select an ISO value: Auto / 100 / 200 / 400.
4. Press OK key again to confirm and return to camera mode.
5. The ISO icon will then be displayed on the LCD screen.
White balance
This setting allows the camera to adjust the color of your photos according to the color of
the light source.
1. Press Up / Down keys to select White balance in Setup menu.
2. Press OK key to enter the White Balance submenu.
3. Press Up / Down keys to select: Auto / Daylight / Cloudy / Incandescent / Fluorescent.