AgfaPhoto DC5500 - Photo Mode: Advanced Adjustments; Exposure, ISO, and Metering Settings; Language Selection

13
Exposure
This setting allows you to control the brightness of your photos.
1. Press SET key to enter the menu.
2. Press Left / Right keys to select
Exposure
.
3. Press Up / Down keys to select an exposure value from +3 to -3.
4. Press SET key again to confirm your selection and then MODE key to return to photo mode.
5. The exposure icon will then be displayed on the LCD screen.
ISO
It is better to activate this setting if the shooting brightness is low and flash using is not possible.
1. Press SET key to enter the menu.
2. Press Left / Right keys to select
ISO
.
3. Press Up / Down keys to select: Auto / 100 / 200 / 400.
4. Press SET key again to confirm your selection and then MODE key to return to photo mode.
5. The corresponding ISO icon will then be displayed on the LCD screen.
Metering
This setting allows you to adjust the metering point.
1. Press SET key to enter the menu.
2. Press Left / Right keys to select
Metering
.
3. Press Up / Down keys to select: Center / Multi / Spot.
4. Press SET key again to confirm your selection and then MODE key to return to photo mode.
5. The corresponding metering icon will then be displayed on the LCD screen.
Language
There are multiple languages available.
1. Press SET key to enter the menu.
2. Press Left / Right keys to select
Language
.
3. Press Up / Down keys to select your language.
4. Press SET key again to confirm your selection and then MODE key to return to photo mode.