AGG AS4300 - Introduction; To User and Operator; Notices for Engine Quality Feedback; Safety Instructions

1
1 Introduction
1.1 To User and Operator
Thank you for purchasing a product of AGG Power!
The AS4300 series diesel engine, available in two displacements of 10L and 12L, is a large-power four-valve
diesel engine with four or six cylinders that is newly developed by AGG Power. Featuring strong power and
low fuel consumption and with the emissions conforming to relevant national regulations, the AS4300 series
diesel engine is a perfect power for the medium- and high-end heavy-duty vehicles and industrial equipment.
This manual mainly covers technical specifications, operation and maintenance instruction, with an aim to familiarize
you with the engine, as well as the proper operation and maintenance thereof. Before using the engine, read carefully
the relevant contents and requirements in this manual. Due to the continuous improvement of performance and
structure of the engine, the technical specifications and illustrations of the engine in this manual may be slightly
different from those of he engine you have, please note that we will provide the supplement and perfection in the later
editions without notice. In case of any question during your engine operation and maintenance, please never hesitate
to contact AGG Power’s after-sale service center info@aggpower.co.uk for technical advice or guidance.
AGG Power has adopted the latest technology and high-quality parts for the engine. The genuine AGG Power
service parts are recommended to be used for repair and maintenance. Please contact AGG Power’s
after-sale service center info@aggpower.co.uk for service parts.
Since this manual ensures proper engine operation and maintenance, it should be given to the new owner when the
engine is traded or sold.
1.2 Notices for Engine Quality Feedback
To better our service, please provide following information when you make feedback about quality issue(s), whereby,
we can understand and analyze the quality issue(s) and the root cause(s) thereof, and make the improvement in time:
1) When and where fault occurred;
2) Engine serial number, model, order number, delivery date and the detailed address of consignee;
3) Service conditions, cumulative operation time (in hours or kilometers), operating conditions (power, speed) and the
grade of fuel and lubricating oil that were used;
4) The characteristics of driven equipment (model, power consumption and structural feature, etc.)
5) The description of faults;
6˅Parts or components claimed for compensation or repair should be mailed or sent in person to AGG Power
headquarter with the damage process record or description for facilitating analysis. If there are several problems or a
very serious problem, please leave the site as it was and inform us promptly, and then AGG Power will send staff for
a joint analysis. Quality issues should be settled based on the relevant provisions in the quality warranty manual.
1.3 Safety Instructions
ƔDo not wear a loose garment or any jewelry when working around the engine or its driven equipment. If necessary,
wear safety goggles, work clothes, safety helmet or other protective items.
ƔAll the exposed rotating parts should be provided with guards with firm installation to prevent personal injury.
ƔThe workroom of the engine should be well ventilated with waste gas exhausted outside.
ƔNo flammable liquid is allowed to be around the engine.
ƔTake all tools, wires, other odds and ends away from the engine prior to starting.
ƔMake sure to shutdown the engine before any adjustment is performed to it and its driven equipment.
ƔSmoking is not allowed during fuel filling, otherwise, fuel steam can cause fire easily.
ƔSmoking is also not allowed when checking electrolyte level because electrolyte will release flammable gas.