AGI NECO D1680 - User Manual

Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 7713397 R2
Revised: June 2021
Original Instructions
Continuous-Flow Grain Dryer
COMMANDER Control
Assembly Manual
This manual applies to following models:
D1660, D1670, D1680, D1690, D16106, D16120, D16140, D16160
D24108, D24150, D24180, D24210, D24240, D24260, D24330, D24380
D32260, D32340, D232440, D32500
INSTALLATION AND WIRING MUST BE IN ACCORDANCE
WITH CEC, NEC, AND LOCAL ELECTRICAL CODES

Summary

Safety

1.1 Safety Alert Symbol and Signal Words

Explains the meaning of safety symbols and signal words used in the manual.

1.2 General Safety

Provides essential safety instructions for assembly and operation.

1.3 Grain Dryer Safety

Details specific safety precautions for operating grain dryers.

1.4 Gas Leak Hazards

Outlines procedures to follow if a gas leak is detected.

1.5 Guards Safety

1.6 Ladder Safety

1.7 Overhead Power Lines

Warns about the dangers of overhead power lines near the dryer.

1.8 Towing the Grain Dryer

Instructions and precautions for safely towing the grain dryer.

1.9 Drives and Lockout;Tagout Safety

Covers safety procedures for drive systems and lockout/tagout.

1.9.1 Electric Motor Safety

Specific safety advice for electric motors and their controls.

1.10 Personal Protective Equipment

Lists essential personal protective equipment (PPE) for safe operation.

1.14 Safety Decal Locations and Details

Transport

3.1 Transport Safety

Outlines critical safety rules for transporting the grain dryer.

3.2 Transport Preparation

Assembly

4.1 Assembly Safety

Provides essential safety guidelines for the assembly process.

4.2 Check Shipment

4.4 Site Preparation

Covers essential steps for preparing the installation site.

4.4.1 Concrete Work - Overview

4.4.2 Set Up Fuel Supply

Details the process for setting up liquid propane or natural gas supply.

4.4.3 Set Up Electrical Supply

Outlines requirements for setting up the electrical power supply.

4.5 Pre-Assembly of Dryer Sections

4.5.4 Catwalk and Safety Cage Assembly

4.5.5 Safety Cage Assembly

4.6 Install Dryer

Comprehensive guide for installing the main dryer sections.

4.6.1 Position Lower Dryer Section at Location

4.6.2 Install NECO Leg Kit

Details on installing the dryer support legs.

4.6.3 Anchor Lower Section to Pad;Foundation

Procedures for anchoring the dryer to its foundation.

4.6.4 Anchor Bottom Platform

4.6.5 Stack and Secure Sections

Guidelines for stacking and securing dryer sections.

4.6.7 Install the Cross Auger or Cross Drag

Detailed steps for installing the cross auger or drag.

Auger Unload

Drag Unload

4.6.8 Install the Blower Motor VFDs (Optional)

Guide for installing Variable Frequency Drives for blower motors.

4.7 Final System Hookup

Procedures for connecting all system components and wiring.

4.7.1 Adjust Control Box Height

4.7.2 Final Electrical Hookup

Guidance on completing the final electrical connections.

4.7.3 Blower Motor Wire(s)

Instructions for wiring blower motors, with or without VFDs.

4.7.6 Install the Fill Switch and Low Switch

4.7.7 Install Moisture;Temperature Sensors

4.7.8 Install the Discharge Chute Cables

4.7.10 HMI Wiring Connections

Detailed instructions for connecting the HMI wiring and Ethernet.

4.7.11 Final Fuel Supply Hookup

Steps for connecting the final fuel supply lines.

Install Vaporizer (Select Models Only)

Natural Gas

Dryer Fuel System Gas Leak Check

Procedures for checking the dryer fuel system for leaks.

4.7.12 External Transport(s)

4.7.13 Commander Control Setup

Steps for setting up the Commander control system.

Bolt Torque

7. Bolt Torque

AGI NECO D1680 Specifications

General

Brand	AGI
Model	NECO D1680
Category	Dryer
Language	English