Chapter 4 Retrofitting Options
To Retrofit A5 DC Power Input Assembly (Option 002)
Assembly-Level Service Guide 4-7
4
7 To install the new A4 AC Power Supply Assembly (53132-60207), connect the ac
power supply’s shorter cable to connector J18 on A1 Motherboard Assembly as
shown in Figure 4-1B.
8 Insert and tighten the two TORX 10 screws (H2) to attach A4 Power Supply
Assembly to the rear of the chassis as shown in Figure 4-1B.
9 Insert and tighten the TORX 15 screw (H1) into the upper-middle of the chassis
as shown in Figure 4-1B.
To Next Page
Loading...
