Agilent 5100/5110 and 5800/5900 ICP-OES Easy-fit Fully Demountable Torch User Guide
5
General
Replace the outer tube-set or the quartz injector when the outer surface of the quartz is rough to the touch
(which indicates signs of wear), or if there are any cracks visible.
For more details, refer to the procedures outlined in the ICP Expert Help and Learning Center or the Agilent
5100/5110 and 5800/5900 ICP-OES Easy-fit Torch Maintenance and Cleaning guide (Agilent publication #
G8010-90015).
Parts list
For spare parts and consumables ordering information, refer to the Agilent Technologies website:
www.agilent.com
The items listed below can be ordered online from the Agilent website or through your local sales
representative
.
Replacement Injectors for fully demountable torch used with 5100/5110 and 5800/5900 ICP-OES
0.8mm ID quartz injector, recommended for volatile organic solvents
1.4mm ID quartz injector, recommended for semi-volatile organic solvents and
acidic solutions with RV torch type
G8020-60806
1.8mm ID quartz injector, recommended for acidic solutions with DV torch type
2.4mm ID quartz injector, recommended for high TDS samples
1.8mm ID alumina injector (inert), recommended for HF digests
Replacement outer tube-sets for torches used with 5100/5110 and 5800/5900 ICP-OES
Quartz outer tube-set, for use with organic solvents, RV type
Quartz outer tube-set, for use with organic solvents, DV type
Quartz outer tube-set, for use with aqueous & acidic solutions, RV type
Quartz outer tube-set, for use with aqueous & acidic solutions, DV type
Other 5100/5110 and 5800/5900 ICP-OES torch supplies
Top seal for fully and semi-demountable torches, pack/3
Injector locking nut for fully demountable torch
To Next Page
Loading...
Need help?
General
