EasyManuals Logo

Agilent Technologies 8753ES Datasheet

Agilent Technologies 8753ES
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
27
Connectors 50-ohm type-N (f) to
75-ohm type-N (m)
standard Option 004,
50-ohm type-N (m) to
75-ohm type-N (f)
Dimensions 14-mm D x 70-mm L
(0.56 in x 2.75 in)
Weight Net 0.1 kg (0.316 lb)
50-Ohm Accessory Kits
The 11853A 50-ohm type-N and the 11854A 50-ohm
BNC accessory kits provide the RF components
generally required when using either the 85046A,
85047A, or 11850C with the 8753ES Option 011
when measuring devices having 50-ohm type-N
or BNC connectors. These kits are supplied with
a storage case.
11853A 50-ohm type-N accessory kit
Includes Part number
Type-N (f) short HP 11511A
Type-N (m) short HP 11512A
Type-N (m) to N (m) adapter 1250-1475
Type-N (f) to N (f) adapter 1250-1472
11854A 50-ohm BNC accessory kit
Includes Part number
Type-N (m) to BNC female adapter 1250-1476
Type-N (m) to BNC male adapter 1250-1473
Type-N (f) to BNC male adapter 1250-1477
Type-N (f) to BNC female adapter 1250-1474
BNC (m) short 1250-0929
75-Ohm Accessory Kits
The 11855A 75-ohm type-N and the 11856A 75-ohm
BNC accessory kits provide the RF components
generally required when using either the 85046B
or the 11850D power splitter with the 8753ES
Option 011 when measuring devices having 75-ohm
type-N or BNC connectors. These kits are supplied
with a storage case.
11855A 75-ohm type-N accessory kit
Includes Part number
Type-N (f) short 1250-1531
Type-N (m) short 1250-1530
Type-N (m) to N (m) adapter 1250-1528
Type-N (f) to N (f) adapter 1250-1529
Type-N (m) termination 1250-1532
11856A 75-ohm BNC accessory kit
Includes Part number
Type-N (m) to BNC (f) adapter 1250-1535
Type-N (m) to BNC (m) adapter 1250-1533
Type-N (f) to BNC (m) adapter 1250-1534
Type-N (f) to BNC (f) adapter 1250-1536
BNC (m) short 1250-0929
BNC (m) termination 11652-60010
RF Limiter
Externally attaches to one or both ports of the
analyzer. Provides protection against potential
high-power transients from external devices.
Specifications
11930A 7-mm RF limiter
Frequency range DC to 6 GHz
Nominal insertion loss
DC to 3 GHz 1.0 dB
3 GHz to 6 GHz 1.5 dB
Return loss
DC to 3 GHz 22 dB
3 GHz to 6 GHz 20 dB
Maximum input power 3 W
Maximum DC 30 V, 350 mA
11930B 50-ohm type-N RF limiter
2
Frequency range 5 MHz to 6 GHz
Nominal insertion loss
5 MHz to 3 GHz 1.0 dB1
3 GHz to 6 GHz 1.5 dB
Return loss
5 MHz to 3 GHz 21 dB
1
3 GHz to 6 GHz 17 dB
Maximum input power 3W
85024A High-Frequency Probe
Two probes may be powered directly from the
front panel of the 8753ET/ES. Refer to technical
specifications, Agilent literature #5954-8393,
for more information.
Specifications
Input capacitance <0.7 pF (nominal)
(at 500 MHz)
Input resistance 1 Megohm (nominal)
Bandwidth 300 kHz to 3 GHz
Gain (at 500 MHz) 0 dB ±1 dB
Frequency response
300 kHz to 1 GHz ±1 dB
1 GHz to 3 GHz +2, -3 dB
Input voltage for
<1 dB compression 0.3 V
Supplement characteristics
Noise figure
<100 MHz <50 dB
100 MHz to 3 GHz <25 dB
Includes Part/model number
Type-N (m) adapter 11880A
10:1 divider 11881A
Spare 12 mil probes 85024-20012
2.5-inch ground lead 01223-61302
Hook tip 10229
Spanner tip 5060-0549
Probe tip nut driver 8710-1806
1. Return loss and insertion loss limited below 16 MHz by series capacitor.
2. Internal bias tees cannot be used with this limiter.

Other manuals for Agilent Technologies 8753ES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies 8753ES and is the answer not in the manual?

Agilent Technologies 8753ES Specifications

General IconGeneral
BrandAgilent Technologies
Model8753ES
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals