Agilent 8753ET/8753ES Network Analyzers
8753ET, 300 kHz to 3 or 6 GHz
8753ES, 30 kHz to 3 or 6 GHz
Configuration Guide
System configuration summary
The following summary lists the main components
required to form a basic measurement system.
In this configuration guide, the network analyzer
options for each model are listed first. General
product options that are available for both the
Agilent Technologies 8753ET and 8753ES are listed
next. Measurement accessories and peripherals
for both the 8753ET and 8753ES are also provided
in this configuration guide.
Transmission/reflection measurements
• Agilent 8753ET network analyzer
• Test-port return cable(s), 50 ohms
• Calibration kit for applicable connector type
Full S-parameter measurements
• Agilent 8753ES network analyzer
• Test-port return cables, 50 or 75 ohms
• Calibration kit for applicable connector type
System with user-selected test set
• Agilent 8753ES network analyzer
• Option 011 delete built-in test set
• S-parameter test set
• Test port return cables for selected test set
• Calibration kit for applicable connector type
To Next Page
Need help?
General
