Hardkey and Softkey Reference ESG Family Signal Generators
Sweep/List
4-104 User’s Guide
Off
This softkey turns off all sweep functions. The output signal is then set
according to the current frequency and amplitude settings defined by
the front panel
Frequency and Amplitude keys.
Softkey Location:
Sweep/List > Sweep > Off
Page Down
Press this softkey to view the next page of list sweep points when you
are in the Goto Row menu that is accessed from the Configure List
Sweep menu. If you are in the Load/Store menu or the Goto Row menu
that is accessed from the Load/Store menu, you will view the next page
of the catalog of list files.
Softkey Location:
Sweep/List > Configure List Sweep > Goto Row >Page Down
Or: Sweep/List > Configure List Sweep > Load/Store > Page Down
Or: Sweep/List > Configure List Sweep > Load/Store > Goto Row > Page Down
Page Up
Press this softkey to view the previous page of list sweep points when
you are in the Goto Row menu that is accessed from the Configure List
Sweep menu. If you are in the Load/Store menu or the Goto Row menu
that is accessed from the Load/Store menu, you will view the previous
page of the catalog of list files.
Softkey Location:
Sweep/List > Configure List Sweep > Goto Row > Page Up
Or: Sweep/List > Configure List Sweep > Load/Store > Page Up
Or: Sweep/List > Configure List Sweep > Load/Store > Goto Row > Page Up
Point Trigger
Pressing this softkey reveals a menu of choices for triggering a sweep
point-by-point. You can choose triggering that occurs after the dwell
time for the previous point has passed, triggering that is supplied by
the GPIB, triggering on either the positive or negative edge of a signal
supplied to the TRIGGER IN connector, or triggering by the front panel
Trigger key.
Default Value: Immediate
Softkey Location:
Sweep/List > Point Trigger
To Next Page
Loading...
Need help?
General
