16
Option UN5 (continued)
Multicarrier cdmaOne
Stress active components by
generating multicarrier CDMA
configurations.
Place up to 12 carriers within a
15 MHz bandwidth, each with a
custom configuration of channels.
Tailor a test to specific requirements
like the complementary cumulative
distribution function (CCDF) by
selecting pre-defined multicarrier
CDMA configurations or explicitly
defining the characteristics of each
channel on each carrier.
Definable custom filters
Define your unique filter.
Choose from IS-95 (standard or
modified, with or without equaliza-
tion) filters, Nyquist, Root Nyquist
or Gaussian filters. Define your
own FIR filter to meet specific (non-
standard) test requirements.
Chip rates to 10 Msps
Support W-CDMA applications
and experimentation.
Chip rates up to 10 Mega-
symbols/sec support W-CDMA
applications as well as many other
unique applications.
Baseband clipping
Reduce signal stress on power
amplifiers.
Clip the peak-to-average power of
signals before or after baseband FIR
filtering. Clipping may be applied
individually to I and Q or to the
composite I/Q vector.
Multicarrier CDMA custom configuration setup.
Multicarrier spectrum corresponding to the custom configuration.
FIR table allows custom modulation filtering.
To Next Page
Loading...
Need help?
General
