Agilent Technologies E444 AU Series Installation Guide

6 Installation Guide
E444xAU Options H20, H25 and H70 E444xAU IF Output Options
Installation Procedure
3. Remove the four feet from the bottom of the PSA instrument by pulling the tabs away
from the instrument and sliding the feet toward the center of the instrument.
Refer to Figure 3.
4. Remove the outside cover by sliding it toward the rear of the instrument.
Figure 3 Bottom Feet Orientation

Agilent Technologies E444 AU Series Specifications

General

Brand	Agilent Technologies
Model	E444 AU Series
Category	Measuring Instruments
Language	English