To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies E4403B and is the answer not in the manual?
General| Frequency Range | 9 kHz to 3.0 GHz |
|---|---|
| Amplitude Accuracy | ±0.5 dB |
| Phase Noise | -98 dBc/Hz at 10 kHz offset (1 GHz carrier) |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz |
| Frequency Accuracy | ±1 ppm |
| Third Order Intercept (TOI) | +15 dBm |
| Input Impedance | 50 ohms |
| Input VSWR | 1.5:1 |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
Inspect the shipping container and verify the contents are complete. Retain shipping materials for inspection and potential future use.
Details AC and DC power requirements, including voltage, power consumption, and fuse specifications for the analyzer.
Overview of front-panel keys and their functions, including control keys, measurement keys, and media access.
Step-by-step guide to performing a basic measurement using the internal 50 MHz amplitude reference signal.
Provides basic checks and procedures to resolve problems before contacting support or returning the analyzer.
Details the four types of messages: Status, Informational, User Error, and Pop-up messages.
