To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies ESA-E E4407B and is the answer not in the manual?
General| Frequency Range | 9 kHz to 26.5 GHz |
|---|---|
| Third Order Intercept (TOI) | +15 dBm |
| Input Impedance | 50 Ohm |
| Sweep Time | 1 ms to 1000 s |
| Detectors | Sample, Negative Peak, Average |
| Interfaces | GPIB |
| Amplitude Range | +30 dBm |
| Input VSWR | 1.5:1 |
| Input Connector | N-type female |
| Dimensions (H x W x D) | 177 mm x 426 mm x 470 mm (6.9 in x 16.8 in x 18.5 in) |
| Power Requirements | 47-63 Hz |
Details the process of identifying and diagnosing cell site performance issues.
Measures spectral energy emitted into adjacent channels for GSM signals.
Measures modulation quality by assessing phase and frequency accuracy in GSM transmitters.
Measures transmit power during GSM bursts and verifies adherence to defined masks.
Measures spurious signals outside the specified transmitter band for GSM conformance.
Checks transmitter's receive band for conformance to ETSI spurious signal specs.
