To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies E4411B and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Frequency Resolution | 1 Hz |
| Display Resolution | 320 x 240 pixels |
| Input Connector | N-type female |
| Power Range | -70 dBm to +20 dBm |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Weight | 4.5 kg |
| Input Impedance | 50 ohms |
Inspect the shipping container and verify that the contents are complete. Keep the container and cushioning material until you have inspected the analyzer.
The analyzer is a portable instrument and requires no physical installation other than connection to a power source.
Describes the functions of the keys on the front panel.
Overview of the analyzer's rear panel connectors and controls.
Guide to performing a basic measurement using the internal 50 MHz amplitude reference signal.
Information on internal alignment routines and warm-up time for accurate measurements.
Details test limits and procedures for measuring displayed average noise level.
Describes testing the analyzer's frequency readout accuracy with a known signal.
Details test limits and procedures for measuring frequency response.
Describes testing the accuracy of the analyzer's reference level.
Explains how to measure amplitude variation when switching resolution bandwidths.
Details testing the accuracy of the analyzer's amplitude scale.
Describes the test for second harmonic distortion.
Explains how to measure tracking generator level flatness for various models.
Provides checks to perform before contacting support or returning the analyzer.
Descriptions of the four types of messages that appear on the display during operation.
Messages indicating conditions that may result in erroneous data.
Instructions for returning the analyzer for servicing, including packaging.
Activates reference level function and accesses amplitude menu keys.
Accesses marker control keys to select and turn markers on/off.
Places a marker on the highest priority peak based on Max or Param criteria.
Accesses System menu keys for local mode control.
Automated performance verification, adjustment software, and calibration guide on CD-ROM.
Provides transmitter/receiver measurements for cdmaOne standards.
Provides transmitter/receiver measurements for GSM standards.
Allows triggering on TV lines and viewing TV images in NTSC, PAL, SECAM.
Required for mobile communication measurements in GSM and cdmaOne personalities.
Provides hardware for many digital communication measurements.
Allows demodulating, displaying, and measuring FM modulated signals.
