Chapter 2 2-25
Getting Started
File Menu Functions
File Menu Functions
This section describes how to use the functions located under the
front-panel
File key. Data storage and retrieval are handled similarly to
that of personal computers (PCs). Like PCs, these analyzers include an
internal storage drive and a floppy disk drive, both of which have
directory and sub-directory capability.
NOTE The descriptions in this section assume the analyzer has firmware
revision A.04.00 or later. The file menu functions in earlier firmware
are different. If you would like to upgrade your analyzer to the latest
firmware revision, please visit the following web site:
http://www.agilent.com/find/esa
You will learn how to do all of the following:
• locate and view files in the catalog
• create a directory
• format a floppy disk
• save a file
• load a file
• rename a file
• copy a file
• delete a file
NOTE The display examples in this section are made using the
Agilent E4407B, you may see some variations depending upon your
analyzer.
Locate and view files in the catalog
Techniques for locating files and directories are consistent throughout
the various file menu functions. Although this section provides specific
information about navigation in the catalog, you may wish to refer back
to this section when performing other operations of the file menu.
Press
File, Catalog to bring up a screen display as shown in Figure 2-6.
To Next Page
Loading...
Need help?
General
