Installation Guide 19
E444xAU IF Output Options E444xAU Options H20, H25 and H70
Performance Tests and Adjustments
Performance Tests and Adjustments
The tests outlined in this section are to verify the operation of the IF Output options and
should be used in conjunction with the standard PSA manuals. This section also includes
the equipment required.
Tests:
• “Equipment Required” on page 20.
• “Option IF Output Amplitude Test Procedure” on page 22.
• “321.4 MHz IF Out Amplitude Test Procedure” on page 24.
• “Measuring the Bandwidth of the IF Outputs” on page 25.
• “Repeat Steps 3 through 6 to measure the bandwidth of the Option IF Output.” on
page 26.
To Next Page
Loading...
Need help?
General
