Need help?Do you have a question about the Agilent Technologies E4980A and is the answer not in the manual?
General| Frequency Range | 20 Hz to 2 MHz |
|---|---|
| Frequency Accuracy | ±0.01% |
| Basic Accuracy | 0.05% |
| Signal Level | 5 mV to 2 Vrms |
| DC Bias | 0 V to ±40 V |
| Display | LCD |
| Interface | GPIB, USB, LAN |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
Describes the program as a VBA macro for Microsoft Excel to transfer list sweep measurement data from the E4980A to a PC.
Lists the supported model (E4980A Precision LCR Meter) and its firmware version (Rev. 2.20).
Details the necessary equipment, including a personal computer, Microsoft Excel, Agilent I/O Libraries, and connection cables.
Instructions to run Agilent Connection Expert by double-clicking its icon in the task tray.
Connects the E4980A and PC using USB or USB/GPIB interface, with automatic configuration noted.
Set measurement conditions for list sweep, then perform compensation using Meas Setup and LIST SETUP softkeys.
Configure the trigger to manual mode by pressing the Meas Setup hardkey and selecting MAN in the TRIG field.
Perform single trigger measurement with the DUT by pressing Display Format, LIST SWEEP, and Trigger hardkeys.
Open the Excel file, enable macros, and follow Step-1 and Step-2 in the 'Main' sheet to run the program.
Select graph parameters on the newly created sheet to display the graph properly, adjusting axes as needed.
Function added to return to local mode, show measurement mode as graph title, evaluated on Win 7/Excel 2010.
Initial revision of the program.
To Next Page
